Jump to content
  • Welcome to Celiac.com!

    You have found your celiac tribe! Join us and ask questions in our forum, share your story, and connect with others.




  • Celiac.com Sponsor (A1):



    Celiac.com Sponsor (A1-M):


  • Get Celiac.com Updates:
    Support Our Content
    eNewsletter
    Donate

Why Won't My Gluten-Free Bread Rise?


Philippa

Recommended Posts

Philippa Rookie

I think I've tried about 6 recipes and had no success with gluten-free bread. It never rises. I bought new yeast because I thought mine must have been too old, but that didn't help. I've made gluten-free bread successfully many times, so I'm not a total amateur.

I made bread from the Bob's Red Mill mixes (both kinds) and I didn't have any problem with the rising, but I discovered that my stomach can't tolerate bean flours, so I can't use those mixes.

Does anyone have advice on gluten free bread making? I don't eat dairy so lots of recipes I find online are not possible for me to use, because they use milk powder (I've never seen the dairy-free versions even in the health food store). I don't think the lack of dairy is the issue (I'm subbing rice milk for cow's milk) because I did that with the Bob's Red Mill mixes as well.


Celiac.com Sponsor (A8):
Celiac.com Sponsor (A8):



Celiac.com Sponsor (A8-M):



kannne Explorer

I think I've tried about 6 recipes and had no success with gluten-free bread. It never rises. I bought new yeast because I thought mine must have been too old, but that didn't help. I've made gluten-free bread successfully many times, so I'm not a total amateur.

I made bread from the Bob's Red Mill mixes (both kinds) and I didn't have any problem with the rising, but I discovered that my stomach can't tolerate bean flours, so I can't use those mixes.

Does anyone have advice on gluten free bread making? I don't eat dairy so lots of recipes I find online are not possible for me to use, because they use milk powder (I've never seen the dairy-free versions even in the health food store). I don't think the lack of dairy is the issue (I'm subbing rice milk for cow's milk) because I did that with the Bob's Red Mill mixes as well.

What is the tempertur on the liquid you add?

RiceGuy Collaborator

Some mixes have xanthan gum already added, while others do not. You'll need to add it and/or other binder to get it to rise properly. However, I've found that some brands of xanthan are more effective than others, and thus you need to use less of it. Otherwise it can actually make the dough to stiff to rise. Adding the right amount of water is also important, and can be a bit tricky. I always add less than I know it will need, mix well, and gradually add more, mixing after each addition, until the dough is of the right consistency. You'll know if you used too much water if it falls after baking, or is too moist/gummy inside.

When you set the dough to rise, how much time do you allow, and what temperature do you keep it at? Also, are you covering the pan with plastic wrap or foil during the rising?

Philippa Rookie

What is the tempertur on the liquid you add?

Usually room temperature. Should it be warmer?

Philippa Rookie

Some mixes have xanthan gum already added, while others do not. You'll need to add it and/or other binder to get it to rise properly. However, I've found that some brands of xanthan are more effective than others, and thus you need to use less of it. Otherwise it can actually make the dough to stiff to rise. Adding the right amount of water is also important, and can be a bit tricky. I always add less than I know it will need, mix well, and gradually add more, mixing after each addition, until the dough is of the right consistency. You'll know if you used too much water if it falls after baking, or is too moist/gummy inside.

When you set the dough to rise, how much time do you allow, and what temperature do you keep it at? Also, are you covering the pan with plastic wrap or foil during the rising?

The recipes I've tried all have xanthan gum. The mixes came with it in, and the other recipes had it as an ingredient. Maybe my xanthan gum is "stronger" and that's why the mixes with it already added worked better. I'll experiment with less.

I have had loaves that fall after baking and are gummy inside. My latest attempt actually was a good texture as far as not being too soggy etc, and it didn't fall. It just didn't rise very much. So maybe less xanthan gum is the trick.

missy'smom Collaborator

I warm my liquid to 110 degrees and make sure the other ingredients aren't too cold. I usually add the yeast to the warm liquid(or part of it) and let it sit for 10 min. The yeast gets a head start that way and should seem active. You can add some of the sugar too to give it food. I cover the pan with the dough in it with a light dish towel-nothing tight, so that it has room to rise. Sometimes I turn the oven on to the lowest setting just for a few min. then turn it off and put the towel covered loaf in. Gives it a nice warm place to rise. At room temp some days it can take quite a while to rise-up to two hours it seems even if the house doesn't seem that cold.

  • 8 months later...
inmygenes Apprentice

I think I've tried about 6 recipes and had no success with gluten-free bread. It never rises. I bought new yeast because I thought mine must have been too old, but that didn't help. I've made gluten-free bread successfully many times, so I'm not a total amateur.

I made bread from the Bob's Red Mill mixes (both kinds) and I didn't have any problem with the rising, but I discovered that my stomach can't tolerate bean flours, so I can't use those mixes.

Does anyone have advice on gluten free bread making? I don't eat dairy so lots of recipes I find online are not possible for me to use, because they use milk powder (I've never seen the dairy-free versions even in the health food store). I don't think the lack of dairy is the issue (I'm subbing rice milk for cow's milk) because I did that with the Bob's Red Mill mixes as well.

You could try letting it rise in a warmed oven. Set the oven to 200F and then once at that temperature put your bread in and turn the oven off, leave it to rise for 40 minutes and then without opening the oven turn it up to the baking temperature. I find this works well.

Getting the proportionate amounts of starch and flour is key. If there is higher fiber, heavier flour and not enough starch it won't rise. Also try reducing the liquid a little. Sometimes if I am using a whole grain flour I'll add an extra tsp of yeast and that helps it to rise.

Are you using live yeast and proofing it? - without that it might not rise.


Celiac.com Sponsor (A8):
Celiac.com Sponsor (A8):



Celiac.com Sponsor (A8-M):



mushroom Proficient

When all else failed, one of our poster bakers added some baking powder to her recipe and let it rise for a shorter time, and it turned out perfectly. Google "buckwheat bread"

Archived

This topic is now archived and is closed to further replies.


  • Celiac.com Sponsor (A19):



  • Member Statistics

    • Total Members
      131,542
    • Most Online (within 30 mins)
      7,748

    Jacqueline Dee
    Newest Member
    Jacqueline Dee
    Joined

  • Celiac.com Sponsor (A20):


  • Forum Statistics

    • Total Topics
      121.4k
    • Total Posts
      1m

  • Celiac.com Sponsor (A22):





  • Celiac.com Sponsor (A21):



  • Upcoming Events

  • Posts

    • petitojou
      Thank you so much! I saw some tips around the forum to make a food diary and now that I know that the community also struggles with corn, egg and soy, the puzzle pieces came together! Just yesterday I tried eating eggs and yes, he’s guilty and charged. Those there are my 3 combo nausea troublemakers. I’m going to adjust my diet ☺️ Also thank you for the information about MCAS! I’m from South America and little it’s talked about it in here. It’s honestly such a game changer now for treatment and recovery. I know I’m free from SIBO and Candida since I’ve been tested for it, but I’m still going to make a endoscopy to test for H. Pylori and Eosinophilic esophagitis (EoE). Thank you again!! Have a blessed weekend 🤍
    • knitty kitty
      Yes, I, too, have osteoporosis from years of malabsorption, too.  Thiamine and magnesium are what keep the calcium in place in the bones.  If one is low in magnesium, boron, selenium, zinc, copper, and other trace minerals, ones bone heath can suffer.  We need more than just calcium and Vitamin D for strong bones.  Riboflavin B 2, Folate B 9 and Pyridoxine B 6 also contribute to bone formation and strength.   Have you had your thyroid checked?  The thyroid is important to bone health as well.  The thyroid uses lots of thiamine, so a poorly functioning thyroid will affect bone heath.  
    • Celiac50
      That sounds so very likely in my case! I will absolutely ask my doctor on my next bone check coming up in March... Thanks a lot! 
    • trents
      Calcium levels as measured in the blood can be quite deceiving as the body will rob calcium from the bones to meet demands for it by other bodily functions. Also, supplementing with calcium can be counterproductive as it tends to raise gut pH and decrease absorption. More often than not, the problem is poor absorption to begin with rather than deficiency of intake amounts in the diet. Calcium needs an acidic environment to be absorbed. This is why so many people on PPIs develop osteoporosis. The PPIs raise gut pH. And some people have high gut PH for other reasons. Low pH equates to a more acidic environment whereas high pH equates to a more basic (less acidic) environment.
    • Celiac50
      Kind thanks for all this valuable information! Since my Folate was/is low and also my Calcium, there IS a chance I am low in B vitamins... My doctor only measured the first two, oh and Zinc as I has twisted her arm and guess what, that was mega low too. So who knows, until I get myself tested properly, what else I am deficient in... I did a hair mineral test recently and it said to avoid All sources of Calcium. But this is confusing for me as my Ca is so low and I have osteoporosis because of this. It is my Adjusted Ca that is on the higher side and shouldn't be. So am not sure why the mineral test showed high Ca (well, it was medium in the test but relative to my lowish Magnesium, also via hair sample, it was high I was told). But anyway, thanks again for the VitB download, I will look into this most certainly!
×
×
  • Create New...

Important Information

NOTICE: This site places This site places cookies on your device (Cookie settings). on your device. Continued use is acceptance of our Terms of Use, and Privacy Policy.