Jump to content
  • Welcome to Celiac.com!

    You have found your celiac tribe! Join us and ask questions in our forum, share your story, and connect with others.




  • Celiac.com Sponsor (A1):



    Celiac.com Sponsor (A1-M):


  • Get Celiac.com Updates:
    Support Our Content
    eNewsletter
    Donate

Printer W/scan, Fax, Copy Functions


debmidge

Recommended Posts

debmidge Rising Star

My Lexmark X85 died and I need to get a new one....any recommendations? I was looking

at these brands:

Lexmark

Epson

Brother

Cannon

HP

It's for my home...I am unsure about what "ppm" means and if a higher ppm is a clearer copy or a lower ppm is... and "dpi" is 4800 average or the higher the number the better copy?

I so don't know anything about this. I bought this Lexmark because it was my first computer & printer in my life. It lasted about 6 years - that's good right? Nothing is stuck in it, but the paper won't roll through it correctly - I guess the rollers are shot.

I also have a size issue....it has to fit into a niche in my computer desk (desk pre-dates "towers" so it can't be higher than 12", wider than 20" nor deeper than 15"). I guess I can put a board on it to extend it more than 15" if I have to.


Celiac.com Sponsor (A8):
Celiac.com Sponsor (A8):



Celiac.com Sponsor (A8-M):



blueeyedmanda Community Regular

I really like HP.

kbtoyssni Contributor

ppm is pages per minute that your printer can print. Printers often have two ppms: a slower ppm if you're printing color and a faster one for black and white. You'll pay more for a higher ppm (i.e. faster printer), so consider the length of the documents you're printing and how fast you need it. If you can wait 30 seconds for your document to print, a lower ppm is a good way to save money without sacrificing print quality.

dpi is dots per inch, so it's how close your printer puts ink dots on the page. A higher dpi will result in higher quality printing. With a lower dpi you may start to see the dots rather than having them all blend together (think regular TV where you can see the pixels if you look closely versus high definition where you won't see any pixels). A higher dpi will cost more and will use more ink so consider if you need top-quality looking printing (which might be necessary if you're going to be making copies of a printout) or if it's just for your own use. One thing to note is that there is a setting in most printer software where you can print in lower quality to save ink and then select higher quality for the few times when you do need it.

I'd also look at ink price and how many sheets can be printed per ink cartridge to get a feel of the cost to keep the thing running.

I love HP. My first computer was an HP, I bought an HP printer (just a cheapie college one), and I now have an HP laptop. I've used two canon printers and disliked both partially because the paper-feed wasn't so good and they ate ink, but these were also pretty cheap printers. I also dont' like Lexmark, but I can't tell you why. It's more of a feeling. You could say I'm brand-loyal :)

blueeyedmanda Community Regular

My first computer was also an HP and now I just purchased my 2nd HP lap top. I got a lifetime out of the 1st, purchased it a few years ago and used it practically 24:7.

I once had a lexmark printer, wasn't too bad, but at work we only have HP printers, and I love mine. It takes up a lot of room on my desk but it is fast!!!

It is an HP Color Laser Jet 3800.

SunnyDyRain Enthusiast

kbtoyssni gave you alot of great information!

I love HP printers, if it's for home you probally only need an ink jet unless you make lots of printouts. Laser are more buiness level, most homes can use ink jet fine. I reccomend the HP's because when you change the ink cartidge, you get a new print head. I have found with other companies that don't replace the print head, you have problems with needing to clean them often and they get blocked.

I would reccomend to stay away from Epson, and Cannons. In my experince, they are tempermental go though quite a bit of ink, and are more hassle than they are worth.

debmidge Rising Star

Thank you guys! I am going shopping on Saturday at Staples

I am not knowledgable about computers nor printers and I am going to try to install it myself. I had the computer tech install it the first time. I didn't get my first computer at home until just 5 years ago about.

SunnyDyRain Enthusiast
Thank you guys! I am going shopping on Saturday at Staples

I am not knowledgable about computers nor printers and I am going to try to install it myself. I had the computer tech install it the first time. I didn't get my first computer at home until just 5 years ago about.

most of the time with scanners, you need to install the software first, then hook up the scanner. I'm not sure if that would be the same with that. I know HP is usally really good with step by step instructions!


Celiac.com Sponsor (A8):
Celiac.com Sponsor (A8):



Celiac.com Sponsor (A8-M):



Rosewynde Rookie

We recently got a new printer to replace our ancient HP Ink Jet, it's paper feeder finally gave up the ghost. We did some looking at color laser printers, figuring the kids would need it for school projects, but the prices were outrageous. One of the workers at Best Buy suggested we check out All in one Photo Inkjet printers. We started comparing print qualities and decided that the HP C6180 was perfect for us. It's print quality was great and not all that far behind laser printer quality. The cartridges cost a whole lot less than laser too. HP's and Epson's both seem to last well.

Rosewynde Rookie

OH i just realized something else you'll have to think about. . there are three types of connections to your computer for printers. The old Serial port style ones, USB, and Network. Most printers are just USB nowadays.

debmidge Rising Star

Then I will take my laptop with me when I go shopping to make sure I have the correct typeof port.

Gentleheart Enthusiast
We recently got a new printer to replace our ancient HP Ink Jet, it's paper feeder finally gave up the ghost. We did some looking at color laser printers, figuring the kids would need it for school projects, but the prices were outrageous. One of the workers at Best Buy suggested we check out All in one Photo Inkjet printers. We started comparing print qualities and decided that the HP C6180 was perfect for us. It's print quality was great and not all that far behind laser printer quality. The cartridges cost a whole lot less than laser too. HP's and Epson's both seem to last well.

I have the C6180 too. It works fine, it's fast and the print quality is good. But there is one piece of information that you should know that I had to find out the hard way. I was advised at the store when I bought the machine to buy the HP Photo Value Pack which has all 6 of the new "02" ink cartridges in one pack along with some 4X6 photo paper sheets that I assumed were free additions. The Value Pack costs only roughly $35 compared to about $65 when bought separately. Being the skeptic I am, I wondered what the catch was, so I called HP. They spoke English very poorly, kept trying to sell me cartridges online and were having a terrible time getting the drift of my question. But in spite of the language barrier, I was eventually told that it was just a great deal because they were trying to promote the new type of cartridges. They said the Value Packs were only going to be offered temporarily because they were such a great deal and that I should take advantage of it while it lasted. So I started buying the value packs.

Soon we noticed that we seemed to be going through cartridges like water. We even regretted buying the machine for a time because we thought it was a design flaw. Recently, I went to buy more cartridges at WalMart. I complained a little to the guy there and he said we needed to call HP again. He had the same language issues, but was able to get this very important information out of them. The value pack cartridges are only PARTIALLY filled instead of fully filled like the individual ones are. The amounts are not stated on the Value box for you to know that, but if you read the box carefully you will see that the pack itself is meant to print ONLY 150 photos. No wonder we were running out so fast! I was paying for photo paper I never used and getting a few drops of ink per cartridge.

So the cartridges DO last a reasonable amount of time when you buy them all separately. I'm not sure it is any big savings over the old style of cartridges, but I learned a good lesson. The first people I spoke to didn't have the answer to my question and just made something up that sounded good.

It's a great machine. I like its performance. But don't buy the Value Packs unless you need photo paper really badly! :)

debmidge Rising Star

wow! Thanks all for advice.

Archived

This topic is now archived and is closed to further replies.


  • Celiac.com Sponsor (A19):



  • Member Statistics

    • Total Members
      131,666
    • Most Online (within 30 mins)
      7,748

    bailey1023
    Newest Member
    bailey1023
    Joined

  • Celiac.com Sponsor (A20):


  • Forum Statistics

    • Total Topics
      121.4k
    • Total Posts
      1m

  • Celiac.com Sponsor (A22):





  • Celiac.com Sponsor (A21):



  • Upcoming Events

  • Posts

    • Inkie
      Thank you for the information ill will definitely bring it into practice .
    • Scott Adams
      While plain, pure tea leaves (black, green, or white) are naturally gluten-free, the issue often lies not with the tea itself but with other ingredients or processing. Many flavored teas use barley malt or other gluten-containing grains as a flavoring agent, which would be clearly listed on the ingredient label. Cross-contamination is another possibility, either in the facility where the tea is processed or, surprisingly, from the tea bag material itself—some tea bags are sealed with a wheat-based glue. Furthermore, it's important to consider that your reaction could be to other substances in tea, such as high levels of tannins, which can be hard on the stomach, or to natural histamines or other compounds that can cause a non-celiac immune response. The best way to investigate is to carefully read labels for hidden ingredients, try switching to a certified gluten-free tea brand that uses whole leaf or pyramid-style bags, and see if the reaction persists.
    • Scott Adams
      This is a challenging and confusing situation. The combination of a positive EMA—which is a highly specific marker rarely yielding false positives—alongside strongly elevated TTG on two separate occasions, years apart, is profoundly suggestive of celiac disease, even in the absence of biopsy damage. This pattern strongly aligns with what is known as "potential celiac disease," where the immune system is clearly activated, but intestinal damage has not yet become visible under the microscope. Your concern about the long-term risk of continued gluten consumption is valid, especially given your family's experience with the consequences of delayed diagnosis. Since your daughter is now at an age where her buy-in is essential for a gluten-free lifestyle, obtaining a definitive answer is crucial for her long-term adherence and health. Given that she is asymptomatic yet serologically positive, a third biopsy now, after a proper 12-week challenge, offers the best chance to capture any microscopic damage that may have developed, providing the concrete evidence needed to justify the dietary change. This isn't about wanting her to have celiac; it's about wanting to prevent the insidious damage that can occur while waiting for symptoms to appear, and ultimately giving her the unambiguous "why" she needs to accept and commit to the necessary treatment. This article might be helpful. It breaks down each type of test, and what a positive results means in terms of the probability that you might have celiac disease. One test that always needs to be done is the IgA Levels/Deficiency Test (often called "Total IGA") because some people are naturally IGA deficient, and if this is the case, then certain blood tests for celiac disease might be false-negative, and other types of tests need to be done to make an accurate diagnosis. The article includes the "Mayo Clinic Protocol," which is the best overall protocol for results to be ~98% accurate.    
    • Scott Adams
      Welcome to the community! Generally, for a gluten challenge before celiac disease blood tests, Tylenol (acetaminophen) is considered safe and should not interfere with your antibody results. The medications you typically need to avoid are those like ibuprofen (Advil, Motrin) or naproxen (Aleve) that can cause intestinal irritation, which could potentially complicate the interpretation of an endoscopy if you were to have one. However, it is absolutely crucial that you confirm this with either your gastroenterologist or your surgeon before your procedure. They know the specifics of your case and can give you the definitive green light, ensuring your surgery is comfortable and your celiac testing remains accurate. Best of luck with your surgery tomorrow
    • Xravith
      Thank you for the advice. I’ve actually never checked for nutritional deficiencies, but for as long as I can remember, I’ve always taken vitamin and mineral supplements — otherwise my symptoms get worse. This week I stopped eating gluten to confirm whether my symptoms are really caused by it. Starting next week, I’ll reintroduce gluten — it’s sad to go back to how I was before — but at least I’ll be able to take the necessary tests properly. I think the diagnostic process will be long, but at least I’m happy that I finally decided to address this doubt I’ve had for years.
×
×
  • Create New...

Important Information

NOTICE: This site places This site places cookies on your device (Cookie settings). on your device. Continued use is acceptance of our Terms of Use, and Privacy Policy.